Sta-Lok 1x19 Wedge for 3/8" Wire Dia. - SLWN12

Sta-Lok 1x19 Wedge

• Recommended where STA-LOK terminals are being reused
• The 1 x 19 wedge can be fitted on site using very simple hand tools
• Must NOT be used for Dyform or compacted strand wire ropes

Important! Sta-Lok wedges shown on this page are intended for Sta-Lok terminal ends with either two or four wrench flats. Some older Sta-Lok fittings had more than four wrench flats and are not compatible with current wedges.

If you have any questions regarding the identification of a Sta-Lok fitting or need a larger size, please call us.